Model “C/D” Master Cup Former Machine

This is a new Machine, which is an enlargement of our Model “C” Machine. The main difference is the ability to use a wider paper, which allows the customer to produce large oblong & large round pan-liners. It also allows the capability of adding larger triple head dies that normally would not fit on a Model “C” Machine. The Machine will handle most size configuration of Fluted Cup sizes that will fit into an 18″ width paper. The Model “C/D” Master Cup Former may be a left or right-handed machine, customer option. Each machine can be customized to fit the customer’s needs and specifications.

The Machine requires a floor space of approximately 10′ wide by 40′ to 60′ long, depending on the rack requested. The entire Master Cup Former Machine is constructed of Steel, Cast Iron, Cast Steel, along with top name brand parts, motors, bearings and electronic components, for many years of dependable service.

Cycle of machine per minute is based on a number of variables – i.e. (Heat, Dwell Time, Open & Closed Flare of Cup, Type of Paper, Moisture Contents of Paper, Number Sheets of Paper Per Nest, and Weather Conditions.)

Machine

  • Paper Width Maximum— (18″)
  • Paper Width Minimum—- (12″)
  • Paper Feed Rolls (Computerized Feed System) (Standard)
  • Automatic A/C speed controls 0-60 cycles per minute. (Standard)
  • Automatic Speed Control Systems, Cycle of machine per minute is based on a number of variables – i.e. (Heat, Dwell Time, Open & Closed Flare of Cup, Type of Paper, Moisture Contents of Paper, Number Sheets of Paper Per Nest, and Weather Conditions)
  • Motor 5 H.P.
  • Braking System (Electric Standard )
  • Voltage Motor —(220-440)
  • Voltage Heat— (220)
  • Air Operated Paper Stripper. (Standard)
  • Machine Width— (40″)
  • Machine Length— (6′)
  • Machine Height — (94″)
  • Machine Weight— (4000 #)
  • Bull Gear System — (16″)
  • Dwell Timing System (Optional)
  • Outer Ram Inside Diameter — (9″)
  • Outer Ram Outside Diameter — (11″)
  • Ram Bored For Triple Header —(Yes)
  • Ram Bored For Double Header— (Yes)
  • Guards (Standard)
  • Painted— (Green)

Rack

  • Paper Width Maximum— (18″)
  • Paper Width Minimum— (12″)
  • Paper Maximum Diameter— (20″)
  • Total Number Rolls Of Paper (27) (Optional Roll Stands Upon Request)
  • Brake Tension Control Manual Adjustment
  • Rack Length— (16′ 6″)
  • Rack Width —(4′)
  • Rack Height— (94″)
  • Rack Weight —(1200 #)
  • Paper Guide Pins (Optional)