Model “C” Master Cup Former Machinemaster_cup_model_c

This is our most popular machine. It will handle any size cup or combination of cups that will fit into a 12″ paper width. The hole in the Ram slide is 8″. We have used this machine for many jobs from coffee filters, up to mounting a 3 up die for muffin cups with a 4-1/2 blank, by 1-15/16 bottom. It will run up to 60 strokes per minute. Cycle of machine per minute is based on a number of variables – i.e. (Heat, Dwell Time, Open & Closed Flare of Cup, Type of Paper, Moisture Contents of Paper, Number Sheets of Paper Per Nest, and Weather Conditions.) This machine can be furnished with any amount of rolls of paper from the back stand requested. The usual is a 30 roll back stand. The diameter of the rolls can be 30″ if necessary. This machine requires a floor space of about 8′ wide by about 50′ long, also allowing room for the operator and packer. This machine requires a 3-Horse Power motor with a voltage of your choice. The weight of this machine is approximately 3,400 #.

Machine:

  • Paper Width Minimum—( 12 ½ )
  • Paper Width Maxim —( 6″ )
  • Paper Feed Rolls (Computerized Feed System) ( Standard )
  • Automatic A/C speed controls 0-60 cycles per minute, electric braking system. ( Standard )
  • The Automatic Speed Control Systems, Cycle of machine per minute is based on a number of variables – i.e. (Heat, Dwell Time, Open & Closed flare Of Cup, Type Of Paper, Moisture Contents of Paper, Number Sheets of Paper Per Nest, and Weather Conditions)
  • Motor —( 3 H.P. )
  • Braking System —( Electric )
  • Voltage Motor—( Choice )
  • Voltage Heat— ( Optional Your Choice )
  • Air Operated Paper Stripper. ( Standard )
  • Machine Width— ( 40″ )
  • Machine Length—( 5′ )
  • Machine Height— ( 94″ )
  • Machine Weight— ( 3,400 # )
  • Bull Gear System
  • Dwell Timing System (Optional)
  • Ram Inside Diameter —( 8″ )
  • Ram Outside Diameter— ( 10″ )
  • Ram Bored For Triple Header —( Yes )
  • Ram Bored For Double Header— ( Yes )
  • Guards —( Standard ) All Exposed Areas Of Machine Shall Be Guarded To Osha Standards, We request you Add All Electronics For The CE Code On All Guards
  • Optional Standards, Domestic or International.
  • Painted— ( Optional Choice Of Color )

Rack

  • Paper Width Minimum
  • Paper Maxim Diameter— ( 20″ )
  • Total Number Rolls Of Paper ( 27 ) (Optional Roll Stands Upon Request)
  • Brake Tension Control Manual Adjustment

Rack:

  • Paper Width Maximum— (18″)
  • Paper Width Minimum— (12″)
  • Paper Maximum Diameter— (20″)
  • Total Number Rolls Of Paper (27) (Optional Roll Stands Upon Request)
  • Brake Tension Control Manual Adjustment
  • Rack Length— (16′ 6″)
  • Rack Width —(4′)
  • Rack Height— (94″)
  • Rack Weight —(1200 #)
  • Paper Guide Pins (Optional)